Search results for "beam [charged particle]"
showing 10 items of 686 documents
Spontaneous intercalation of Ga and In bilayers during plasma-assisted molecular beam epitaxy growth of GaN on graphene on SiC
2019
The formation of a self-limited metallic bilayer is reported during the growth of GaN by plasma-assisted molecular beam epitaxy on graphene on (0001) SiC. Depending on growth conditions, this layer may consist of either Ga or In, which gets intercalated between graphene and the SiC surface. Diffusion of metal atoms is eased by steps at SiC surface and N plasma induced defects in the graphene layer. Energetically favorable wetting of the (0001) SiC surface by Ga or In is tentatively assigned to the breaking of covalent bonds between (0001) SiC surface and carbon buffer layer. As a consequence, graphene doping and local strain/doping fluctuations decrease. Furthermore, the presence of a metal…
Modified arabinoxylan-based films. Part B. Grafting of omega-3 fatty acids by oxygen plasma and electron beam irradiation.
2003
Arabinoxylans (AXs) are byproducts of the cereal milling industry. To obtain high-value products, AXs have been used as a film-forming agent. Hence, AX-based films are poor water vapor barriers. The objectives of this study were to graft omega-3 (omega3) fatty acids onto AX polymeric chains by using two new technologies: cold plasma and electron beam (EB) irradiation. Results show that the surface hydrophobicity of the modified films is higher than that of a waxy coating or a low-density polyethylene (LDPE) film. In addition, FTIR spectroscopy analysis reveals vibration bands attributed to new chemical functions. Finally, a decrease in water vapor permeability (WVP) is obtained for the film…
Thin film preparation of the low charge carrier density Kondo system CeSb
1999
Abstract We report the thin film preparation of CeSb by means of molecular beam epitaxy (MBE) onto sapphire (1 1 −2 0) substrates. Above a substrate temperature of about 300°C CeSb crystallizes in (0 0 1) orientation. The growth mode of the films changes from a fiber textured to an epitaxial mode for deposition temperatures above 900°C. Although the specific resistivity is enhanced the characteristic energy scales, like the Kondo temperature TK and the magnetic ordering temperature TN, are not changed significantly.
Polyamorphic transformation induced by electron irradiation ina-SiO2glass
2009
We report a study by electron paramagnetic resonance of amorphous silicon dioxide $(a{\text{-SiO}}_{2})$ irradiated by 2.5 MeV electrons in the dose range from $1.2\ifmmode\times\else\texttimes\fi{}{10}^{3}$ to $5\ifmmode\times\else\texttimes\fi{}{10}^{6}\text{ }\text{kGy}$. By measuring the change in the splitting of the primary $^{29}\text{S}\text{i}$ hyperfine doublet of the ${E}_{\ensuremath{\gamma}}^{\ensuremath{'}}$ centers we evidenced an irradiation induced local (around the defects) densification of $a{\text{-SiO}}_{2}$. Our data show that the local degree of densification of the materials is significantly higher than that obtained by mean density measurements, suggesting that the …
Carbon nanotubes under electron irradiation: Stability of the tubes and their action as pipes for atom transport
2005
The production and migration of carbon interstitials in carbon nanotubes under electron irradiation is studied experimentally and theoretically. It is shown that the threshold for displacing carbon atoms and the defect production rate strongly depend on the diameter of the nanotubes. Multiwalled nanotubes shrink by a loss of atoms and by diffusion of interstitials through the inner hollow in the axial direction. Thus, experimental evidence is given that nanotubes can act as nanoscale pipes for the transport of atoms.
Optimal ferromagnetically-coated carbon nanotube tips for ultra-high resolution magnetic force microscopy
2013
Using single-walled carbon nanotubes homogeneously coated with ferromagnetic metal as ultra-high resolution magnetic force microscopy probes, we investigate the key image formation parameters and their dependence on coating thickness. The crucial step of introducing molecular beam epitaxy for deposition of the magnetic coating allows highly controlled fabrication of tips with small magnetic volume, while retaining high magnetic anisotropy and prolonged lifetime characteristics. Calculating the interaction between the tips and a magnetic sample, including hitherto neglected thermal noise effects, we show that optimal imaging is achieved for a finite, intermediate-thickness magnetic coating, …
Fabrication and characterization of chromium based single-electron transistors with evaporated chromium oxide barrier tunnel junctions
1999
We fabricated chromium based single-electron transistors comprising small-area Cr/CrOx/Cr tunnel junctions with an evaporated chromium oxide barrier. The transistors are fabricated using e-beam lithography with a bilayer resist and two-angle shadow evaporation. We describe the fabrication process and discuss the device characteristics.
Fabrication and characterization of small tunnel junctions through a thin dielectric membrane
1998
We show that a small tapered hole through a thin silicon nitride membrane provides a mask for tunnel junction structures. Our experiments imply, unlike in the conventional planar electron beam lithography, that tunnel junctions are well voltage biased in this structure with vanishingly small on-chip impedance. Our technique allows fabrication of double junctions, and even multijunction linear arrays, with small metallic islands in between.
Transport of Water and Particles in Microfluidics Devices Lithographically Fabricated Using Proton Beam Writing (PBW)
2009
Proton beam writing (PBW) is a MeV ion beam lithography technique that has gained interest in many biological applications such as fabricating microfluidic devices for Lab-On-a-Chip (LOC) applications where capillary forces are important for fluid flow. PBW has a unique capability of being able to direct-write patterns in thick (1-30µm) polymer resist layers with straight vertical sidewalls. It can be used to prepare master stamps and moulds for mass production in polymeric materials. A recent development, where the direct writing of an entire pattern element is carried out in parallel makes PBW especially well suited for Bio-MEMS LOC applications. In this study we have examined the flow dy…
Work in the field of BNCT using the Portuguese Research Reactor
1999
Abstract The goal of this work is to pursue the research activity in BNC and the installation of a therapy facility in the position presently occupied by the thermal column. With these objectives the experimental studies in mice and cells are continuing while improvements in the facilities are created or prepared. For this effect: (1) the installation of lead shield in the vertical access of the thermal column, which resulted in an enhancement of the Φ th toD γ ratio, was performed, (2) the adaptation of a beam tube to deliver a dominantly thermal or epithermal beam in two possible beam openings is being done and (3) Monte Carlo calculations aiming at the optimization of the conditions for…